Quick detachable jointsn type QJ-100, QJ-150, QJ-168, QJ-200, QJ-250, QJ-300 is designed to join steel fire and drainage pipelines, requiring frequent disassembly and transportation, as well as for fixed installations.
Basic parameters and dimensions:
|Parameter name||Standards for the types of|
|1. Diameter of conventional joining Dy, mm||100||150||168||200||250||300|
|2. Operating pressure of pressurized water, MPA||6,4||6,4||6,4||6,4||6,4||6,4|
|3. Overall dimensions, not more mm than:|
|4. Mass, кг||4,9||10||7,4||11,3||19,1||36|
Variations in the mass ±3%
The main used materials are rolled sheet and steel.
The service life of the compounds at least 3 years.
The service life of at least three compounds letSrok warranty is 12 months from the date of commissioning, but not more than 18 months from the date of receipt of the customer connection.
Quickdetachable joint consists of two flanges, butt welded to the ends of the tubes, which are located between the rubber ring flanges are clamped to the yoke, which is made up of two half rings. On either side of half-rings clamp rigidly attached ears, on the one hand hinged connection, the other tabs are made with a hole for the wedge.
Quickdetachable joint is used for reliable and fast connection of high-pressure pipelines, can be installed on downhole pipelines, production facilities, and drainage chambers TRIM, process piping in any position in space from horizontal to vertical.
|Model||Capture width, m||Work speed, km/h||Depth of processing, cm||Unitized: tractor power h.p.|